100% australian

DRIZORO MAXSEAL

Description MAXSEAL is a cement-based mortar with special additives and controlled aggregates. Once cured, it becomes a suitable waterproof coating for use on concrete, brick, concrete block, masonry substrates.  

Read More

EVO BLOCKSEAL

EVO-BLOCKSEAL EARTH FRIENDLY WATERPROOFING SYSTEM BASED ON ADVANCED ACRYLIC POLYESTER POLYMER TECHNOLOGY EVO-BLOCKSEAL – Penetrating up to 100mm, inorganic transparent water based impregnate. Outperforming all silane and standard acrylic solutions. Negative pressure to 4 Bar (60 psi Non toxic, non-caustic, non-flammable, polyester polymer formulation. Waterproofs, insulates, hardens and preserves concrete blocks permanently. Causes a chemical […]

Read More

DRIZORO MAXGRIP GROUT

Description Maxgrip is a mixture of cements and selected special additives and aggregates. A pourable, cement-base, non-shrinking, quick-setting hydraulic compound.

Read More

Crommelin WB2K Hydropoxy

WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier. VOC Content of WB2K is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1.

Read More

Crommelin Cemproof Flex

Cemproof Flex is a two-component, flexible cementitious waterproofing product ideal for use in both positive and negative side waterproofing applications and for use direct onto damp surfaces. Once applied and cured, CEMPROOF FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction such as concrete, natural and […]

Read More

ARDEX WPM 368

Description ARDEX WPM 368 is a single component acrylic copolymer membrane that will prevent rising damp, efflorescence and will resist negative hydrostatic pressure when used in accordance with the technical data sheet. It has excellent adhesion to most substrates including brick, masonry, concrete block, concrete, stone and is simple to use by brush, roller or airless spray machine. ARDEX WPM 368 […]

Read More

ARDEX WPM 300

Description ARDEX WPM 300 is a two component water based epoxy polyamide membrane/ barrier coating. Can be applied to damp surfaces AS 4020:2000 Potable Water Approved Hydrostatic pressure resistant waterproof membrane Prevents rising damp and formation of efflorescence Water based – safe to use in sensitive locations

Read More